Molds for later part of this year (1 Viewer)

David Spragg

Flush
Site Vendor
Joined
Mar 9, 2014
Messages
1,756
Reaction score
4,549
Location
UK
Anyone thinking about placing orders on the 5 molds listed below, these molds will likely be in use sometime between end of November and early January - get your orders in now as I have mostly just one order for each which is not very cost effective so it will speed things up :)

Jockey
No Mold
FDL
Hourglass
Dice & Cards
 
Glad to see a Jockey order. Hopefully the customer is a PCF member and we'll see some pr0n!
 
MD-50 & FDL here...

I wasn't counting your FDL actually. I have two and yours will make three. I know there will be others also.
I was more giving a heads up on the others as some people just missed the cut-off last time and asked if I could post a reminder.
 
Agree re MD-50. The No Mold cries out for a very old school cash set (likely solids). I have no need for more chips but . . .

Will I be good for the A mold? I'll be placing an order at the end of the month.

Amold is in use almost all the time as it always accounts for 50% of orders.
 
Amold is in use almost all the time as it always accounts for 50% of orders.

I always thought there is always only one mold in use at time and the A-mold is one of the least I would have expected for such a case.
Potentially Ewing for casinos (which is a shame that I cannot order a set on that mold)
 
I always thought there is always only one mold in use at time and the A-mold is one of the least I would have expected for such a case.
Potentially Ewing for casinos (which is a shame that I cannot order a set on that mold)

It does not work like that.
There are 6 presses. One permanently for 7/8 inch slugs. One permanently for 1 inch slugs. One as needed for 1-1/16 slugs.
There are as many orders on Amold as all the other molds put together so that nearly always stays in.
That leaves 2 'free' presses for other molds.
The molds come from different era's. Some will only fit specific presses. Things are not all interchangeable. Hence it is not always possible to predict timescales.
 
It does not work like that.
There are 6 presses. One permanently for 7/8 inch slugs. One permanently for 1 inch slugs. One as needed for 1-1/16 slugs.
There are as many orders on Amold as all the other molds put together so that nearly always stays in.
That leaves 2 'free' presses for other molds.
The molds come from different era's. Some will only fit specific presses. Things are not all interchangeable. Hence it is not always possible to predict timescales.

David, you should (please!) start a "CPC Technic Thread" with some details and pics :)
I am pretty sure that almost everybody here is interested as I am.
And I absolutely understand if you won't ;)
 
David, you should (please!) start a "CPC Technic Thread" with some details and pics :)
I am pretty sure that almost everybody here is interested as I am.
And I absolutely understand if you won't ;)

That would be proprietory info which I am afraid our gaming licence requirements prohibit us from doing.
 
This doesn't shock me at all.



This, however, is news to me. Interesting that that license prohibits you from discussing your own proprietary info. Wouldn't have thought that.

I must have posted the same thing a dozen times in the last 18 months. :)
The request was for pics.
The internal controls document that is part of my Nevada Gaming Licence prohibits the taking of photographs within the factory.
And proprietory means just that - not for sharing :)
 
That would be proprietory info which I am afraid our gaming licence requirements prohibit us from doing.

I must have posted the same thing a dozen times in the last 18 months. :)
The request was for pics.
The internal controls document that is part of my Nevada Gaming Licence prohibits the taking of photographs within the factory.
And proprietory means just that - not for sharing :)


Sad to hear that, however, I can totally understand it.
 
I know this was asked when CPC came alive, but I am getting closer to wanting a set on a mold but one thing that holds me back is WHEN is the oversize A mold coming out, or what would it take to get the oversize A mold running?????

I REALLY want an oversize $20 but Scroll is the only on you have available at this time.
 
I know this was asked when CPC came alive, but I am getting closer to wanting a set on a mold but one thing that holds me back is WHEN is the oversize A mold coming out, or what would it take to get the oversize A mold running?????

I REALLY want an oversize $20 but Scroll is the only on you have available at this time.
I've been asking for years on the oversized A mold coming back. Hoping that it can get back up and running!
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top Bottom